Go Power! GP-1750HD - Manual (Page 10)

Go Power! Modified Sine Wave Inverter
Owner’s Manual
10
*Installation using two 12 volt batteries
* Installation
using two 12 volt batteries.
* Installation using two 6 V batteries.
5. Operation
To operate the power inverter, turn it on using the ON/OFF switch on the front panel.
The power inverter is now ready to deliver AC power to your loads. If you are
operating several loads from the power inverter, turn them on separately after the
inverter has been turned ON. This will ensure that the power inverter does not have to
deliver the starting currents for all the loads at once.
5.1 Controls and indicators
The ON/OFF switch turns the control circuit in the power inverter ON and OFF. It does
not disconnect power from the power inverter.
When the switch is in the OFF position, the power inverter draws no current from the
battery. When the switch is in the ON position but with no load, the power idle current is
approximately 1 A (see product specifications for exact current draw).
5.2 Optional On / Off remote
The optional remote switch can be used to turn the inverter on and off from a location up
to 25 feet away. The inverter should be OFF when plugging remote in. Once the
remote is installed the inverter ON/OFF switch must be in the ON position.
Fuse
12 V
GP Inverter
6 V
_
_
+
GP Inverter
Fuse
+
+
_
6 V
12 V