Go Power! GP-1750HD - Manual (Page 14)

Go Power! Modified Sine Wave Inverter
Owner’s Manual
14
10. RV Supplement
10.1 Installing the GP 2500, GP 1750HD, and without an automatic
transfer switch
• Plug main power cord into inverter (a 15 amp adapter may be required).
• Battery inter-connects should be a minimum of 4 gauge.
• Ensure converter is turned Off when plugging into inverter.
• To avoid hidden loads turn inverter off when power is not required.
*DC connections – use appropriate GP DC Install Kit.
10.2 Installing the GP 2500, GP 1750HD, and with an automatic
transfer switch
• Battery inter-connects should be a minimum of 4 gauge.
• Ensure converter is turned Off when inverter is operating.
• To avoid hidden loads turn inverter off when power is not required.
*DC connections – use appropriate GP DC Install Kit.
12 V Batteries
On/Off Remote
(Optional)
Shore Power Cord
Go Power!
Transfer
Switch
Converter
RV Power Cord
GP
Inverter
Go
Power!
Fuse
Go Power!
Fuse
Remote On/Off (Optional)
AC to GP
Plug Inverter
12V Batteries