GoDEX G500 series - Manual (Page 19)

15
3 Operation Panel
G500 Series
LED Operation Panel
 FEED Button
When you press the FEED button, the printer moves the label to the defined stop position. If you are using
continuous labels, pressing the FEED button will move label stock until you release the button again. If you are
using individual labels, pressing the FEED button will move only one label. If the label does not stop at the correct
position, please run the auto calibration
(See Section 3-2. for the label size calibration function) on the label stock.
 LED Indicators
3-1
Operation Panel
015
LED indicator Status Description
Green
Standby mode The printer is ready for operation.
READY
X STATUS
X READY
Red STATUS
Error mode
The printer has detected an error.
(See Section 3-3. for Error alerts)
Beeps
X
2 x 2 beeps
2 x 3 beeps
2 x 4 beeps