GoDEX G500 series - Manual (Page 45)

41
APPENDIX Product Specifications G500 Series
Appendix_Product Specifications 042
Dimension Length 11.2” (285 mm) Height 6.8” (171 mm) Width 8.9” (226 mm) Weight 6 lbs (2.72Kg) ,excluding consumables Options Cutter Module Label Dispenser (peel) External label roll holder for 10” (250 mm) O.D. label rolls External label rewinder
i >>> Specifications are subject to change without notice. All company and/or product names are trademarks and/or registered trademarks of their respective owners. >>> Minimum print height and maximum print speed specification compliance can be dependent on non-standard material variables such as label type, thickness, spacing, liner construction, etc. Godex is pleased to test
non-standard materials for minimum print height and maximum print speed capability.
Model G500 G530
APPENDIX Interface
G500 Series
Appendix_Interface
043
Pinout description
 Parallel Port
Handshaking: DSTB is sent to the printer, BUSY to the host computer.
Interface Cable: Parallel cable compatible with IBM computers.
Pinout: See below.
 Serial Port
Default Settings: Baud rate 9600, no parity, 8 data bits, 1 stop bit, XON/XOFF protocol and RTS/CTS.
 USB
Connector Type : Type B
Pin NO. Function Transmitter
1
2-9
10
11
12
13
14
15
16
17
18
19-30
31
32
33-35
36
/Strobe
Data 0-7
/Acknowledge
Busy
/Paper empty
/Select
/Auto-Linefeed
N/C
Signal Gnd
Chasis Gnd
+5V,max 500mA
Signal Gnd
/Initialize
/Error
N/C
/Select-in
host / printer
host
printer
printer
printer
printer
host / printer
host
host / printer
printer
host / printer
RS232 HOUSING (9-pin to 9-pin)
DB9 Socket DB9 Plug
--- 1 1 +5V,max 500mA
RXD 2 2 TXD
TXD 3 3 RXD
N/C 4 4 N/C
GND 5 5 GND
DSR 6 6 RTS
RTS 7 7 CTS
CTS 8 8 RTS
N/C 9 9 N/C
PC Printer
Pin NO. 1 2 3 4
Function VBUS D- D+ GND
APPENDIX Product Specifications
G500 Series
Appendix_Product Specifications