GoDEX G500 series - Manual (Page 22)

18
4 NetSetting for Ethernet
G500 Series
Installing The NetSetting software
The NetSetting software is used to manage the network configurations when connecting the printer via Ethernet port.
It is available on product CD or can be downloaded from official website. To install the NetSetting, please follow below
steps.
STEP-01Insert the product CD in the CD/DVD drive of the host computer and open the "Ethernet" folder on the CD.
STEP-02Select the icon for the NetSetting installation file and click it to start the installation.
STEP-03Follow the instructions on the screen. The Setup Wizard guides you through the installation procedure.
STEP-04Specify the “Installation Folder".
STEP-05Click ”Next” to start the installation.
STEP-06Once the installation is completed; you will see the NetSetting icon on your desktop.
4-1
NetSetting for Ethernet
018
4 NetSetting for Ethernet
G500 Series
The interface of NetSetting
Click the NetSetting icon to start the program; you will see the start page as below. The start page will display the
basic information of connected printer and your PC.
Click the magnifier icon to search the Godex printers which are connected via Ethernet port in you network
environment. Once a connected Godex printer is detected, it will be listed on the start page.
There are six tabs on the top of interface which can configure different types of network settings. But for the data
security reason, you need correct password to enter the configuration pages.
4-2
NetSetting for Ethernet
019

The default password is “1111”, you can change the password later from the “IP Setting” tab. NOTICE