HITEC X2 Ultima: DC/DC, 200 Watt, Dual Port Multi-Charger - Manual (Page 30)

MAXIMUM CIRCUIT POWER CHART
This charger is designed and approved exclusively for use with the types of batteries
stated in this instruction manual. Hitec RCD accepts no liability of any kind if the
charger is used for any purpose other than that stated. We are unable to ensure
that you follow the instructions supplied with the charger and we have no control
over the methods you employ for using, operating and maintaining the device. For
these reasons, we are obliged to deny all liability for loss, damage or costs which
are incurred due to the incompetent or incorrect use and operation of our products,
or which are connected with such operation in any way. Unless otherwise prescribed
by law, our obligation to pay compensation, regardless of the legal argument
employed, is limited to the invoice value of those Hitec RCD products which were
immediately and directly involved in the event in which the damage occurred.
Liability exclusion
Specification
200mA/cell
1~6cells
1~18cells
2V~24V
727g
200x135x57mm
Operating voltage range
Circuit power
Charge current range
Discharge current range
Current drain for balancing Li-Po/Ion/Fe
Li-Ion/Fe/Polymer cell count
NiCd/NiMH battery cell count
Pb battery voltage
Net weight
Dimension
DC 11.0~18.0 Volt
Max. Charge power 2x200Watts
Max. Discharge power 2x25Watts
0.1~10.0A
0.1~5.0A
Battery
Type
29