HITEC X2 Ultima: DC/DC, 200 Watt, Dual Port Multi-Charger - Manual (Page 4)

INTRODUCTION
Please read this entire operating manual before using this product, as it covers
a wide range of information on operation and safety.
03
The unit is simple to use, but the operation of a sophisticated automatic charger/
discharger such as the X2 Ultima does require some knowledge on the part of the
user. These operating instructions are designed to ensure that you quickly become
familiar with its functions.
It is therefore important that you read the Instruction Manual, Warning and Safety
Notes thoroughly before you attempt to use your new automatic charger
for the first time. We hope you have many years of pleasure and success with your
new battery charger.
The X2 Ultima employs the circuit that features dual output power of 200 watts each.
Total output power is 400 watts. Each output can charge or discharge up to 18 cells
of NiCd/NiMH or 6 series of Lithium batteries with a maximum current of 10 amps.
The X2 Ultima has an individual cell voltage balancer, so it does not require a separate
balancer when charging Lithium batteries (LiPo/Li-Ion/LiFe) for voltage balancing.
Reliable/durable capacitive touch systems are used for charger controls. With no
moving parts to wear out, the wear and tear issues which plague conventional switches
are inherently eliminated. Additionally, because the capacitive touch buttons are
mounted behind solid substrates, user and environmental abuse are not a concern.
The three capacitive touch buttons and the 'Select Wheel' are multi-function charger
controls, as indicated by the printed legends. The 'Select Wheel' has three functions:
1. Rotate to the right: This action changes the functions of the charger or increases the
value of the charger's parameters.
2. Rotate to the left: This action changes the functions of the charger or decreases the
value of the charger’s parameters.
3. Holding the + or - button down produces a continuous change. Holding the
button down for a long period accelerates the rate of change.
The fan cooling system is smart and efficient. The fan speed is controlled by an
internal temperature sensor.
Please BE SURE to read these instructions and Warning and Safety Notes before
you use the charger for the first time.
It can be dangerous to mishandle batteries and battery chargers, as there is
always a risk of batteries catching fire and exploding.