JUGS Sports Lite-Flite Machine - Manual (Page 11)

10
GROUNDING PIN
GROUNDED OUTLET BOX
OR GENERATOR OUTLET
Figure 1
draw . An undersized extension cord will cause a drop in line voltage, resulting in
a loss of power and causing the motor to overheat . Only round-jacketed cords
listed by Underwriter's Laboratories (UL) should be used .
When working with the machine outdoors, use an extension cord designed
for outside use . This is indicated by the letters WA on the cord's jacket .
Before using the extension cord, inspect it for loose or exposed wires and cut
or worn insulation .
WARNING: Keep the cord away from the rotating-tire area . Repair or
replace a damaged or worn cord immediately .
Electrical Connection
Your JUGS pitching machine is powered by a 90-volt motor . Do not
operate this machine on direct current (DC) . A substantial voltage drop will
cause a loss of power, and the motor will overheat . If the machine does not
operate when plugged into an outlet, double check the power supply . Your
pitching machine will operate from a standard 110-voltage AC outlet .
This machine is intended for use on a circuit that has an outlet like the one
shown in figure 1 . It also has a grounding pin like the one shown .