JUGS Sports Lite-Flite Machine - Manual (Page 8)

• Use the right ball. Use only JUGS
Lite-Flite
®
or JUGS Polyballs in
this machine . DO NOT USE REAL
BASEBALLS OR SOFTBALLS .
• Inspect extension cords periodically. Replace them if damaged .
• Use the proper extension cord. Make sure your extension cord is in
good condition . When using an extension cord, be sure to use one heavy
enough to carry the current your machine will draw . An undersized cord
will cause a drop in line voltage resulting in loss of power and overheating .
A wire gauge size (AWG .) of at least 16 is recommended for an extension
cord 25 feet or less in length . If in doubt, use the next heavier gauge . The
smaller the gauge number, the heavier the cord .
• Do not abuse the cord. Never yank the cord to disconnect it from a
receptacle . Keep cord away from heat, oil, and sharp edges . Stay constantly
aware of the cord’s location, and keep it well away from the rotating tire .
• Dress properly. Do not wear loose clothing, gloves, neckties, rings,
bracelets, or other jewelry . They can get caught and draw you into the
moving parts . Long hair should be tied up and tucked under hats and
helmets . Severe physical harm may result if loose clothing, jewelry or hair
is caught in rotating tire .
• Always wear safety glasses and batting helmets while the wheels are
rotating. Debris on the tires can fly off and cause physical harm . Everyday
eyeglasses have only one-impact-resistant lenses; they are NOT safety
glasses .
• Never touch rotating tire. Do not put hands or fingers into the ball feed
chute . Hands and fingers should only go to the edge of the chute .
• Inspect the machine before every use. If damaged, have it repaired by
a qualified JUGS service technician .
• Inspect tire before every use. Be sure tire is free of grit and debris before
turning on the machine .
7