Konig Electronic High definition DVB-S2 plug-in receiver - Manual (Page 17)

5. Press the blue key to pop up the Search window.
FTA only, Scan Channel, Network Search:
Press the
keys to select the proper option.
Press the OK key to start searching.
3. System Setup
1. Press the OK or key to move the cursor to the right menu.
2. Press the PR+, PR- keys to move the cursor up or down.
3. Press the EXIT or
key to move the selection to the left menu.
3.1 Language
1. Press the OK key to enter the Language window. Press the
keys
to select the language circled, while pressing the PR+, PR- keys to move
the cursor up or down within the circle.
2. Press the MENU or EXIT key to save and exit.
3. For language type, please refer to the customer configuration.
3.2 TV System
Press the PR+, PR- key to move the cursor up or down, while pressing the
keys to change the setting (the setting will take effect immediately).
1. Display Mode: Select between 1080i_25, 1080i_30, 1080p_50, 720p_60,
720p_50, 576p, 576i, 480p, 480i, By Native TV and 1080p_24.
2. Aspect Mode: 4:3 PanScan, 16:9.Select between 4:3LetterBox.
3. Video Output: Select between RGB and CVBS.
4. Digital Audio Out: Select between LPCM Out and BS Out.
3.3 Display Setting
1. Brightness:
Press the key to select from 0-100.
2. Contrast: Press the key to select from 0-100.
3. Saturation: Press the key to select from 0-100.
4. Hue: Press the key to select from 0-100.
5. Sharpness: Press the key to select from 0-10.
3.4 Local Time Setting
1. Summer Time: Select between ON and OFF.
“OFF” delegates the normal time. If ON is selected, the time will add one
hour.
2. GMT Offset: When selecting “ON” in the GMT Usage item, the system will
get the date and time information from the screen automatically. Date and
Time items will turn grey. Select the proper option in the GMT Offset item.
The default setting is GMT ON.
3. Date, Time: When selecting “OFF” in GMT Usage, the Date and Time
items take effect, while GMT Usage turns grey. Use the numeric keys to
input the desired value 5.
After setting, press the MENU or EXIT key to exit and save. If the value is
invalid, the system will display “Invalid input! Continue to edit?”. Press the
OK key on the Yes option to continue with the modification, or press the
OK key on the No option to exit without saving.
3.5 Timer Setting (Not available for this model)
If there is no programme, you cannot enter this window. There are 8 timers
that can be set.
Select Timer up or down, and press the OK key to enter the setting window.
1. Timer mode: The default mode is off. You can set the timer once, daily,
weekly, monthly or yearly.
2. Timer Service: Select between Channel or Record. If the Channel is
selected, the Wakeup Channel is displayed in the following screen. If
Record is selected, the Wakeup Message is displayed in the following
17