Konig Electronic High definition DVB-S2 plug-in receiver - Manual (Page 20)

4.5.1 About CA Info
In the About CA Info sub-menu, you can view the basic information about this
conditional access such as Card Status, CAS System ID, Interface Version,
Card Number, Number of sessions, Country Indicator, and Maturity Level.
4.5.2 Change PIN
The Change PIN window is designed for changing the smart card’s PIN,
which is required if you want change the maturity level settings.
In order to change the PIN, you must know the current PIN, also called the old
PIN. Input the new PIN you want twice (New PIN and Confirm PIN must be
the same). Move the cursor to the OK button and press the OK key, and the
system will pop up a dialogue box informing you of the PIN change result.
Note that the PIN can only made up of Arabic numerals.
4.5.3 Change Signature PIN
Follow the instructions above for Change PIN.
Note: The signature PIN will be locked after three failed attempts to enter the
correct PIN. If locked, please call the product dealer for help.
4.5.4 Maturity Level
Input the PIN then Move the cursor to Select Maturity level, you can select
A-Over18, X-Erotic, G-General audience, PG-Parental Guidance, then move
cursor to the Change Maturity level button and press the OK key, and the
system will pop up a dialogue box informing you of the result.
4.5.5 Subscription Status
View detailed information for the Subscription Status.
4.5.6 Even Status
View the detailed information for the Event Status.
4.5.7 Token Status
View the detailed information for the Tokens Status.
4.6 Upgrade by USB
1. Upgrade File: View the Upgrade File.
2. Upgrade Mode: Select between allcode, maincode, defaultdb, userbd.
and Dump When users change the upgrade mode, Upgrade File will
show the corresponding file according to the table below:
Upgrade Mode File feature
All code: File named as “*.abs”
Main Code: File named as “*.abs”
Radio back: File named as “*.abs”, the
picture will be used as both
the radio back and menu
back
Default db: File named as “*.abs”
20