Konig Electronic High definition DVB-S2 plug-in receiver - Manual (Page 4)

GENERAL INFORMATION
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programmes via
satellite. This user guide covers the installation of the DSR and the necessary steps to implement various
features. This also explains special features available only in this DSR in detail, which will allow you to make
full use of these features. Information presented in this document is subject to change. We reserve the right,
without notice, to make change in product design or performances, as improvements are made in engineering
or technology.
MAIN FEATURES
• MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.264/AVC HD, MP4
• Embedded Conax
• SCPC and MCPC receivable from C/Ku band satellite
• Automatic PAL/NTSC conversion
• 4000 channels TV and Radio programmable
• 32 different favourite groups selection
• Multi-language OSD
• Fully supports 7 day Electronic Programme Guide (EPG)
• Picture in Graphics (PIG) support
• True colour On Screen Display
• Automatic network search for newly added transponders
• Fully supports DiSEqC 1.2, 13/18V, 0/22K, 0/12V LNB control
• Various channel editing functions (favourite, moving, locking, renaming, deleting and sorting)
• Parental control for channels
• Easy to use Menu System
• Software upgrades through RS232 port and receiver to receiver, support
• USB upgrade
• 8 Timer Reservations, automatically switch to a specific channel (Not active for this model)
• Subtitle support DVB EN300743 and EBU
• Teletext support DVB ETS300472 by VBI and OSD
• Automatic save for last channel
• Channel list can be sorted alphabetically A-Z, Scramble, Favourite, Lock, Sat
• Dual display HD and SD simultaneous
• Supports FAT16/FAT32/FAT12
• Only lists JPEG/BMP files
• 480i/p, 576i/p, 720p, 1080i,1080p with HDCP copy protection
• Games
• 1 recording, then can still perform another pre-programmed recording (not active for this model)
FOR YOUR SAFETY
• To avoid electric shock hazards, do not open the cabinet. Refer servicing to qualified personnel only.
• Keep the receiver away from flower vases, tubs, sinks, etc., in order to avoid damaging the equipment.
• Do not expose the receiver to intense sunlight and keep it away from any heat sources.
• Do not block the ventilation holes of the receiver so that air can circulate freely.
• When a power surge occurs, you should cut off the power immediately.
• Do not touch the receiver during thunderstorms, as it may create electric-shock hazards.
• Switch the receiver off whenever it remains out of service for an extended period.
• Be sure to turn the receiver off and disconnect the AC power cord before cleaning the receiver surface. If
the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap and water solution and
wrung out thoroughly. Then wipe again with a dry cloth.
IMPORTANT SAFETY INSTRUCTIONS
1. All the safety and operating instructions should be read before this product is operated.
2. The safety and operating instructions should be retained for future reference.
3. All warnings on the appliance and in the operating instructions should be adhered to.
4. All operating instructions should be followed.
5. Do not use this apparatus near water. The appliance should not be used near water or moisture, for
example in a damp basement or near a swimming pool.
6. Clean only with a dry cloth.
4