Lab.gruppen PLM 20000Q - Manual (Page 63)

Front Panel Interface
57
PLM Series Operation Manual rev 1.2.3
Serial Number (Serial No.)
The printed serial number on the back panel of the PLM is also electronically embedded in the hardware,
and therefore cannot be removed or altered if stolen.
Max Output Voltage (MaxOutVolt)
Displays the maximum output voltage per channel that can exist across the PLM’s output terminals. This is
the absolute maximum, not the voltage defined by the ISVPL setting.
When Bridge Mode is activated, double the channel
output voltage is available.
Max Output Current (MaxOutCurr)
Displays the maximum output current that can be delivered by the PLM, summed across all output chan-
nels.
7.11.5.2 Frame Reset
MENU > FRAME > RESET
Use this option to display a further menu with options to reset all parameters back to their original factory
default values. See section 9.3 for a full list of these values. Two types of reset are provided, Factory Reset
and Soft Reset.
Factory Reset
A Factory Reset will reset all settings and parameters to the original factory-defined default values. This
includes the deletion of any Frame Presets stored within the device. It also resets the IP Address and all
network related settings; a hard power cycle is required to complete this reset.
Soft Reset
A Soft Reset will reset all settings and parameters to the original factory-defined default values, but retains
Frame Preset information and IP / Network configuration. A power cycle is not required to complete this
type of reset.