Labconco Biological Safety Cabinets 34610 Series User Manual
Page 50
Advertising
Chapter 6: Maintaining The Cabinet
Product Service 1-800-522-7658
45
Front Panel Removal and Installation:
1. Locate and remove the two
Phillips screws that secure the
front panel as shown in Figure 6-3.
They are located on the bottom
corners of the front dress panel.
2. Swing the bottom of the dress
panel out to clear the fluorescent
light and then lift the front dress
panel straight up and away from
the
cabinet.
Figure 6-3
Figure 6-2
Advertising
This manual is related to the following products: