Labconco Biological Safety Cabinets 34610 Series - Manual (Page 62)

Product Service 1-800-522-7658 57
A A p p p p e e n n d d i i x x D D : :
A A c c c c e e s s s s o o r r i i e e s s
NOTE: Accessories marked with an asterisk (*) require a qualified
certifier to install and/or calibrate before use.
Telescoping Base Stands
The user sets the height of these stands before installation. The height can be
set from 27.5 to 33.5 inches in 1-inch intervals, providing a cabinet work
surface height of 30.0 to 36.0 inches. The Base Stands for each Purifier
Logic Series model are listed below.
Width Logic Series # Base Stand w/Feet #
4' 34410-xx 3730400
6' 34610-xx 3730600
Telescoping Base Stand Shelf Kit (# 3850100)
This 20 x 8-inch long shelf is specifically designed to hold the Aspirator
Pump or other small accessories, and attaches to the lower right side of the
base stand. The kit includes shelf, braces and self-drilling fasteners. NOTE:
A power drill with a 5/16-inch socket is needed to attach the fasteners to
the base stand.
*Seismic Bracket Kit (# 3857000)
Stainless steel brackets and attaching hardware to secure Telescoping Base
Stands in areas of seismic activity (does not include fasteners to attach to
floor).
*Service Valve Kit (# 3747500)
Includes serrated hose tip ball valve with quarter turn handle, hardware and
instructions for plumbing to services mounts on left or right side interior. All
cabinets are factory prepared to accept up to 4 fixtures. Shipping weight 4 lbs
(2 kg).