Labconco Total Exhaust Biological Safety Cabinets 30368 Series - Manual (Page 39)

Chapter 5: Using The Cabinet
Product Service 1-800-522-7658 33
Original instructions
If you choose to use Night-Smart option for the
UV lamp, this screen allows you to control the
time the UV lamp will remain on after the sash
is closed. Use the
▲ and ▼ buttons on the
touchpad to cycle through the time intervals
available, and then press
OK to select it. The
screen will then return to the first MyLogic
screen.
Navigating the Settings Menu Screens
The Settings screens will allow an administrator to set some of the cabinet’s
operational parameters. Please note all Settings screens have a green
background.
Units of Measure
Note: The Units of Measure refers to the display of airflow velocities if the
cabinet is equipped with the optional airflow sensor.
Using the
▲ and ▼ buttons on the touchpad, highlight the Settings option-it
will turn green when selected. Press OK to enter the first Settings screen:
OK Button
Using the
▲ and ▼ buttons on the touchpad,
highlight the Units of Measure option-it will
turn white when selected, and then press OK .
Using the ▲ and ▼ buttons on the touchpad,
highlight either metric or imperial units of
measure-it will turn white when selected, and
then press
OK . The screen will then return to
the first Settings screen.