Labconco Protector Demonstration Hoods 3945021 - Manual (Page 11)

Chapter 3: Getting Started
Product Service 1-800-522-7658 7
Unpacking the Hood
Carefully remove the shrink-wrap or carton on the hood and inspect it for
damage that may have occurred in transit. If damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.
DO NOT RETURN GOODS WITHOUT THE PRIOR AUTHORIZATION
OF LABCONCO. UNAUTHORIZED RETURNS WILL NOT BE
ACCEPTED.
IF ENCLOSURE WAS DAMAGED IN TRANSIT, YOU MUST FILE A
CLAIM DIRECTLY WITH THE FREIGHT CARRIER. LABCONCO
CORPORATION AND ITS DEALERS ARE NOT RESPONSIBLE FOR
SHIPPING DAMAGES.
Do not discard the packing material until you have checked all of the
components and tested the unit.
We recommend that you do not remove the hood from its shipping container
until it is ready to be placed into its final location. Move the unit by placing a
flat, low dolly under the shipping skid, or by using a floor jack.
Do not move the hood by tilting it onto a hand truck.
Installing the Hood on a Supporting
Structure and Work Surface
When installing the hood onto a chemically resistant work surface or
benchtop, ensure that the structure can safely support the combined weight of
the hood and any related equipment. The work surface should be at least as
wide as the hood to properly support it. The front of the hood should be
aligned within 1/8" of the front of the work surface. Mounting holes are
provided in Labconco accessory work surfaces to secure the hood. The
mobile Demonstration Hood features a work surface attached to the cart.
The United States
Interstate
Commerce
Commission rules
require that claims
be filed with the
delivery carrier
within fifteen (15)
days of delivery.