Labconco Protector Demonstration Hoods 3945021 - Manual (Page 42)

Chapter 7: Accessorizing Your Protector Demonstration Hood
Product Service 1-800-522-7658 38
1. Work Surfaces
An optional dished work surface is available to attach to the hood.
Dished work surfaces are contoured to fit the dimensions of the hood to
contain spills. Epoxy is chemical-resistant.
Catalog # Description Dimensions (W x D x H)
3908402 Black, 4-foot wide 48" x 26.66" x 1"
3908405 Gray, 4-foot wide 48" x 26.66" x 1"
2. Guardian™ Digital 1000 and Guardian™ 500 Airflow Monitors
The Guardian Digital 1000 Airflow Monitor or Guardian 500 Airflow
Monitor allows you to continuously monitor airflow through the hood.
The rear exhaust plenum is factory prepared to mount either monitor.
Catalog # Description
3944700
Guardian 500 Airflow Monitor, 115V, 60 Hz
3944701 Guardian 500 Airflow Monitor, 230V, 50 Hz
3908800 Guardian Digital 1000 Airflow Monitor 115V, 60 Hz
3908801 Guardian Digital 1000 Airflow Monitor 230V, 50 Hz
3. Fluorescent Lights
A fluorescent light, which rests on the top of the hood, is available.
Catalog # Description
3909200
18.25" W x 10.12"D x 3.00" H Light, 115V, 60 Hz
3909201 18.25" W x 10.12"D x 3.00" H Light, 230V, 50 Hz
4. Exhaust Transition Adapters
Adapter connects to the hood from either the top or the bottom of the rear
plenum so the duct can be routed either up or down, respectively. The
transition is available for either 5.00" ID hose or 6" OD duct. The 5.00"
ID hose lower connection is included with the FilterMate supplied with
the mobile cart.
Catalog # Description Material
3912400 Upper connection, 5" Hose Epoxy-Coated Steel
3912401 Upper connection, 6" Duct Epoxy-Coated Steel
3912402 Lower connection, 5" Hose Epoxy-Coated Steel
3912403 Lower connection, 6" Duct Epoxy-Coated Steel