Freeze dryer controls – Labconco FreeZone and FreeZone Plus 6, 12 and 18 Liter Freeze Dry Systems 79600 Series User Manual
Page 24
20
Chapter 4: Using Your Freeze Dryer
Product Service: Domestic 1-800-522-7658, International 816-333- 8811
Freeze Dryer Controls
The control panel for the Freeze Dryer is shown below with a
description about its function.
1. LCD Display – Displays system operating parameters, set-up
parameters and alarm messages.
2. Menu Switch – This switch is used to change the display from
operating system parameters to set-up parameters.
3. Select Switch – Used to select set-up parameters.
4. Vacuum Switch – Used to start or stop the vacuum pump when
operating in manual start-up mode.
5. Vacuum Indicator – This green LED indicates that power is being
supplied to the vacuum pump receptacle on the back of the Freeze
Dryer.
6. Manual Refrigeration Switch – Used to start only the refrigeration
module.
7. Manual Operation Indicator – When lit, the green LED indicates the
Freeze Dryer is being controlled manually by the operator. The
operator must start each function.
8. Auto Mode Switch – Used to start or stop the refrigeration and the Auto
Mode process.
1
5
15
17
19
2
10
11
7
9
8
6
4
14
16
18
3
12