Laerdal SimNewB Advanced - Manual (Page 8)

6
S ETUP G UIDE
T ROUBLE -
SHOOTING
C
OMPRESSOR
S
PECIFICATIONS
C
LINICAL
S
IMULATION
I
NTRODUCTION
External Air
- The air tube can be attached to the Compact Compressor or external air regulator.
Manikin Cable
- Connect the manikin to the Link Box, an adapter cable (included) may be required.
Link Box Power
- Power is supplied to the Link Box from battery or from the AC power adapter. The same power adapter can be used
to charge the battery. See SimPad DFU for charging instructions.
BP Cuff
- The air tube from the BP cuff is connected directly to the Link Box.
Network
- The Link Box is connected to either the SimPad (wireless or wired) or to a PC.
See the associated DFU for connection and setup.
Setup of SimNewB Standard Components
Link Box
Adapter Cable
Battery
BP Tube
Network Cable
(Optional)
External Air
Source
Setup of SimNewB Standard Components
Check that the Link Box and SimPad have charged batteries.
The Link Box can also be connected to external power using the DC Power Supply
- Connect the empty IV-bag set to the Umbilical Reservoir Overflow tube.
Note-The overflow tube has a valve to prevent leakage from the tube when not attached to IV-bag set.
IV Bag