Balance setting – LW Measurements HRB 224 Magnetic Force Balance User Manual
Page 22
Balance Setting
Setting the Parameters (Menu Codes)
Example: Adapting the balance to “very unstable" ambient conditions (menu code: . . ).
Step
Key (or instruction)
Display/Data output
1. Switch off the balance.
2. Switch the balance on.
3. Tare the balance.
TARE
.
g
MENU > 2 sec
.
ż6FUROO upward within a menu
MENU
.
level; after the last menu code, the first repeatedly
. . .
code is displayed again.
.
3. Select menu level 2(scroll to
[F]
.
the right).
4. Select menu level 3(scroll to
[F]
. . o
the right).
5. Menu level 3: MENU repeatedly
. .
Scroll until the desired
number is shown.
6. Confirm change;
[F]
. .
“o” on display indicates
active setting.
ż5HWXUQWRKLJKHUPHQXOHYHO
.
Return to higher menu level
ż6HWRWKHUFRGHVDVGHVLUHG [MENU], [F], [CF]
7. Save changes and Press and hold
MENU > 2 sec.
exit the menu.
or
ż([LWPHQXZLWKRXWVDYLQJ
changes.
>Restart again
.
g
[CF]
20