LW Measurements HRB 224 Magnetic Force Balance - Manual (Page 7)

Getting Started
Connecting the Balance to AC Power/Safety Precautions
Use only original HRB power adapter.
Insert the right-angle plug from the AC adapter into the jack on the balance.
The AC adapter rated to Class
can be plugged into any wall outlet without additional
safety precautions.
Antitheft Locking Device
You can use the security device on the back of the balance to avoid the steal behavior.
You can use chain or lock to insert into the security device, and connect with a fix point.
Connecting Electronic Peripheral Devices
Make sure to unplug the balance from AC power before you connect or disconnect a
peripheral device(printer or PC) to or from the interface port.
Warm up Time
To deliver exact results, the balance must warm up as list below after initial connection to
AC power or after a relatively long power outage.
í All models: at least 30 minutes
Only after this time will the balance have reached the required operating temperature.
Using Verified Balances in Legal Metrology:
Ƞ Allow the equipment to warm up for at least 24 hours after initial connection to AC power.
5