LW Measurements HRB 224 Magnetic Force Balance - Manual (Page 15)

Application Programs
Counting
Menu code: . .
Display symbol: pcs
Purpose
With the Counting program you can determine the number of parts that each have
approximately equal weight. To do this, a known number of parts (the reference sample
quantity) is weighed first, and the individual piece weight (reference weight) is calculated
from this result. Thus the number
of parts subsequently placed on the balance can be determined from their weight.
Features
í The minimum load is equal to one digit defined according to the resolution of the active
weight unit.
í Long-term storage of the last reference sample quantity “nRef" entered.
í Toggling between piece count and weight by pressing [F].
Function Keys
[F]: Begin determination of piece weight
> Application program initialized with predefined reference sample quantity.
[CF]:
End application program; clear initialization data
Default/Initial parameter
Reference piece:10 (Menu code: . . )
Preparation
Set parameters for the Counting program: reference Balance setting
Select the application program : Menu code: . . Counting
Set the following parameters:
Code . . 5 pieces
Code . . 10 pieces
Code . . 20 pieces
Code . . 50 pieces
Code . . 100 pieces
Please reference Balance setting
13