MOCET IG7600 - Manual (Page 33)

IG7600 Administration Manual
4.5 Auto Hold
You may enable the feature to simplify call handling and avoid accidental “lost” calls. Hold
will automatically place any call that is currently connected at your phone on hold
whenever a Trunk line button is pressed.
4.6 Call Fork
IG7600 supports to ring another extension or an outside destination via IP Trunk
simultaneously when the extension gets an incoming call. When the call is answered by
one of the both parties, the call at the other party will stop ringing automatically.
For the Call Fork destination, IG7600 supports to have the second Fork destination. If
the first destination is non-existed or busy, make the forking call to the second Forking
Destination.
To Activate (Type: 0 – ICM, 1 – Outside, 2 – Both; Destination#: 1 – first, 2 – second)
*26 + Destination# + Type + Ext No
*26 + Destination# + Type + * + (PSWD) + * + Outside Number
To Cancel
**26
 cancel the both forking destination.
**261  cancel the first forking destination.
**262
 cancel the second forking destination.
Call Fork is not applied to Operator call, Paging call and UCD call
4.7 Call Forward
Call Forwarding reroutes incoming calls from one extension to another destination. The
destination of a call forward can be another extension, voicemail box or an outside phone
number (External Call Forward; ECF).
IG7600 support the following feature access codes to program Call Forwards for
IP2061/M22/M62/M54(-i) and FXS. It includes a “Type” setting for each Call Forward. It
can be programmed to “ICM”, “Outside” or “Both” (Type: 0 – ICM, 1 – Outside, 2 – Both).
Direct Call Forward:
Forward all of the calls without regard to the extension status.
To enable, dial *21 + Type + Ext/VAA/UCD No.
*21 + Type + * + (PSWD) + * + Outside Number
To disable, dial **21.
Busy Call Forward:
Forward the calls if the extension is busy.
To enable, dial *22 + Type + Ext/VAA/UCD No.
*22 + Type + * + (PSWD) + * + Outside Number
To disable, dial **22.
No Answer Call Forward:
Forward the calls if the extension doesn’t answer the call within No Answer Time.
To enable, dial *23 + Type + Ext/VAA/UCD No + * + Time.
*23 + Type + * + (PSWD) + * + Outside Number + * + Time
To disable, dial **23.
DND Call Forward:
Forward the calls if the extension enabled DND.
To enable, dial *24 + Type + Ext/VAA/UCD No
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 27 of 127