MOCET IG7600 - Manual (Page 79)

IG7600 Administration Manual
6.6.1.3 Security Card Registration
This page shows the Door Card table, and allows you to configure them.(Figure 6-48)
Figure 6-48. Voice – Phone – Door Card
When you want to add new door card to this table, you should push the “Start
Register” button to start the register process and swipe the card. At most you can add
32 cards. You can change a card’s name and status in the table by pressing the edit
button
6.6.1.4 Programmable keys
This page allows you to configure the default settings for IP phone’s programmable Keys.
While a new-allocated IP phone is registering to IG7600, IG7600 will send these settings
to the phone. You can select Extension, Trunk, Call Park, Feature key, Do Not Disturb,
Live Record, Virtual Mailbox and Others to these Programmable keys. (Figure 6-49)
Line keys are for IP Trunk setting is only for M54(-i)’s 4 line keys. By default it is disabled
and the 4 line keys on M54(-i) will show the status of PSTN Trunk; You can enable it here.
If you enable it, M54(-i) will show the status of IP Trunk on its 4 line keys.
Programmable Keys 1-16 are specially for M22 and M62.
EDM Key 1-24 can be applied to IP2061’s or M22 and M62’s EDM.
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 73 of 127