MOCET IG7600 - Manual (Page 61)

IG7600 Administration Manual
Figure 6-24. Advanced – Parental Control – URL Filter – Add
6.4.7 Quality of Service
It’s separated into two parts: DSCP Marking, and Bandwidth Control
6.4.7.1 DSCP Marking
IP QoS is applied to the traffic from LAN to WAN; the traffic from WAN to LAN will not be
applied. (Figure 6-25)
If "Enable DSCP Mark” checkbox is selected, choose a default DSCP mark to
automatically mark incoming traffic without reference to a particular classifier. Click "Save
Settings" button to save it. Note: If "Enable DSCP Mark” checkbox is not selected, all QoS
will be disabled for all interfaces. The default DSCP mark is used to mark all egress
packets.
Figure 6-25. Advanced – Quality of Service – DSCP Marking
6.4.7.2 Bandwidth Control
Bandwidth Control allows you to control WAN port's upstream bandwidth according to
your settings, and it can ensure the highest priority IP packet traffic throughput. By default,
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 55 of 127