Nor-Cal Intellisys Throttling Butterfly Valve - Manual (Page 12)

12 12 Visit our Web Site www.n-c.com
TBV-OP-LIT 01/04
I
NTELLISYS
T
HROTTLING
B
UTTERFLY
V
ALVES
13 Call toll free 800-824-4166 or 530-842-4457 • FAX 530-842-9130
TBV-OP-LIT 01/04
I
NTELLISYS
T
HROTTLING
B
UTTERFLY
V
ALVES
APPENDIX II – Valve, Spare Parts, Hardware and Cable Assembly Ordering Information
TBV Part Number and Ordering Information
Use the model number tree and matrix below to define a valid Nor-Cal Products throttling butterfly valve model number.
TBV
Drive Type Nominal Port ID Flange Type Seal Material Flange Size
Spare Parts
TABLE A-II.1 – TBV SPARE PARTS
MODEL
NUMBER DESCRIPTION
54-310-004 Oldham Coupling Disk – Acetal. For all valves up to and including 4” (ISO-100)
54-330-006 Oldham Coupling Disk – Acetal. For 6” (ISO-160) valve and some UVD assemblies.
54-330-016 Oldham Coupling Disk – Acetal. For 8” (SIO-200) valve and some UVD assemblies
54-330-017 Oldham Coupling Disk – PEEK. For all valves up to and including 4” (ISO-100)
Call for details Oldham Coupling Disk – PEEK. For 6” (ISO-160) valve and some UVD assemblies.
Call for details Oldham Coupling Disk – PEEK. For 8” (SIO-200) valve and some UVD assemblies
TBV-400-90 Viton O-ring kit. Set of four. For all TBV sizes up to and including 4” (ISO-100)
TBV-600-90 Viton O-ring kit. Set of four. For 6” (ISO-160) TBV
TBV-800-90 Viton O-ring kit. Set of four. For 8” (ISO-200) TBV
TBV-1000-90 Viton O-ring kit. Set of four. For 10” (ISO-250) TBV
Cable Assemblies and Accessories
TABLE A-II.2 – TBV AND APC CABLE ASSEMBLIES AND ACCESSORIES
MODEL
NUMBER DESCRIPTION
TBV-CRD-10 10’ (3 meter) APC controller-to-TBV valve cable
CDG-CRD-DB15-10 10’ (3 meter) APC controller-to-15-pin CDG cable
CDG-CRD-DB9-10 10’ (3 meter) APC controller-to-9-pin CDG cable
CDG-CRD-10 10’ (3 meter) APC controller-to-flying lead CDG cable
APC-CRD-RS232-10 10’ (3 meter) APC controller-to-host RS-232 interface cable. DB-9 connector on host end
APC-PSM-DB15 24 VDC, 3A power supply (100-240 VAC input) for IQ-series TBV. Includes AC power cord and 6’ (2 meter) DC cable with 15-pin D-sub connector
IQ-CRD-RS232-10 10’ (3 meter) long IQD-to-host RS-232 interface cable. DB-9 connector on host end
CDG-IQ-CRD-DB15-10 10’ (3 meter) long IQD-to-CDG interface cable. DB-15 connector on CDG end
CDG-IQ-CRD-Y 1’ (30 cm) long Y-cable used to interface two CDGs to IQD.
Call for details RS-232 Service Software for Windows PC
DRIVE
TYPE
NOMINAL
PORT ID
FLANGE
TYPE
FLANGE
SIZE
SEAL
MATERIAL
D = Direct drive 100 = 1 NW = “KF” quick clamp style 25 = 1.00 NW Blank = Viton
G = Geared drive 150 = 1 1 / 2 ISO = ISO through bore 40 = 1.50 NW Kxx* = Kalrez
IQA = IQ-Series with Analog/TTL and serial communications * 200 = 2 CF = Conflat metal seal 50 = 2.00 NW Cxx* = Chemraz
IQD = IQ-Series with DeviceNet and serial communications * 250 = 2 1 / 2 ASA = ASA 63 = 2.50 ISO Pxx* = Perlast
* Direct drive only 300 = 3 JIS = JIS 80 = 3.00 ISO xx* = Other
400 = 4 100 = 4.00 ISO
*xx Designates compound,
call for details
600 = 6 160 = 6.00 ISO
800 = 8 200 = 8.00 ISO
1000 = 10 250 = 10.00 ISO