Pitney Bowes MapMarker USA - Manual (Page 193)

Chapter 8:
Writing Geocoding Output to Another Table
MapMarker USA 25
193
User Guide
Click OK.
5. In the Select Table dialog box, select the specific table that contains the addresses you want to
geocode, then click OK. For example, an MS Access table selection might appear as follows:
6. You may be asked if you want to use a different table for output. Answer Yes if you want to write
the geocoded results to a different table.
7. To write results to a different table, choose the data source for the output table. For example, you
might select Add_Table_Out as the results table to contain the geocoding output. Click OK.
8. If your source table has multiple unique keys, the Describe Table Relationship dialog appears.
Proceed to step 9 . If your table has only one key, the Select Input Column dialog appears. Skip
to step 10 .
9. In the Describe Table Relationship dialog, select the address source columns and the
corresponding columns with unique keys in the results table. In the Input Table list, select the
input column and drag it to the Selected Input Columns box for Key 1. In the Output Table list,
select the input column/key that is linked to the input column and drag it to the Selected Output
Keys box for Key 1. Repeat for additional columns and keys. To remove a column name, drag
the <Clear> item on top of them.