Using address range geocoding – Pitney Bowes MapMarker USA User Manual

Page 87

Advertising
background image

Chapter 3:

Using Address Range Geocoding

MapMarker USA 25

87

User Guide

Using Address Range Geocoding

Some business locations are identified by address ranges. For example, a shopping plaza could be
addressed as 10-12 Front St. This is how business mail would typically be addressed to such a
business location. These address ranges can be geocoded to the interpolated mid-point of the
range.

L

Address ranges are different than hyphenated (dashed) addresses that occur in some
metropolitan areas. For example, a hyphenated address in Queens County (New York City)
could be 243-20 147 Ave. This represents a single residence (rather than an address range)
and is geocoded as a single address. If a hyphenated address similar to this example is
returned as a close match candidate, address range geocoding will not be attempted.

Address ranges cannot be geocoded in CASS™ mode, since the range is not an actual USPS

®

address. Also, the following fields are not returned by address range geocoding:

•

ZIP + 4

®

(in multiple segment cases)

•

Delivery Point

•

Check Digit

•

Carrier Route

•

Record Type

•

Multi-Unit

•

Default flag

See the following topics:

Address Range Geocoding Capabilities and Guidelines on page 87

Examples of Address Ranges on page 88

Address Range Geocoding Capabilities and Guidelines

Address Range geocoding works within the following guidelines:

•

There must be two numbers separated by a hyphen.

•

The first number must be lower than the second number.

•

Both numbers must be of the same parity (odd or even) unless the address segment itself has
mixed odd and even addresses.

•

Numbers can be on the same street segment or can be on two different segments. The
segments do not have to be contiguous.

•

If both numbers are on the same street segment, the geocoded point is interpolated to the
approximate mid-point of the range.

•

If the numbers are on two different segments, the geocoded point is based on the last valid
house number of the first segment. The ZIP Code™ and FIPS Code are based on the first
segment.

•

In all cases, odd/even parity is evaluated to place the point on the correct side of the street.

Address range geocoding will not be attempted in the following cases:

Advertising