Rocktron Blue Thunder - Manual (Page 49)

MIDI Dump/Load
Any or all of the Blue Thunder presets may be dumped to a sequencer or another Blue Thunder via
system exclusive messages. The information exchanged when performing a MIDI Dump consists of
parameter values, title characters and controller assignment information. When dumping a single preset
into another Blue Thunder, the dumped preset may be loaded into any preset location on the receiving
Blue Thunder.
To dump a single Blue Thunder preset into another Blue Thunder
Operating the Blue Thunder
Connect a standard MIDI cable from the MIDI OUT of the transmitting Blue Thunder to the
MIDI IN on the receiving Blue Thunder. Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Blue Thunder
back to the MIDI IN of the transmitting Blue Thunder.
Step 3 Turn the FUNCTION SELECT controls on both the transmitting and receiving Blue Thunders
until "MIDI DUMP/LOAD" is displayed on each.
MIDI DUMP/LOAD MIDI DUMP/LOAD
Step 4 Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/
LOAD".
1 PR DUMP/LOAD 1 PR DUMP/LOAD
RECEIVING Blue Thunder
RECEIVING Blue Thunder
TRANSMITTING Blue Thunder
TRANSMITTING Blue Thunder
46
Press the EDIT button to enter the “EDIT MODE”
EDIT MODE
Step 2