Rocktron Blue Thunder - Manual (Page 6)

2. Quick Setup
SELECTING A PRESET
STEP 1 Turn the PRESET control to select the desired preset. The new preset will be recalled automatically.
ADJUSTING THE EQUALIZATION
STEP 2 Turn the BASS control to adjust the bass level as desired.
STEP 3 Turn the MIDDLE control to adjust the middle level as desired..
STEP 4 Turn the TREBLE control to adjust the treble level as desired.
CHANGING PRESET PARAMETERS
NOTE: The EQ controls serve a dual purpose. When the Blue Thunder powers up the EQUALIZATION controls are
active. To change preset parameters (such as to adjust the delay or distortion, etc.) you must enter into the “EDIT
MODE”. To do this follow these steps.
STEP 5 Press the EDIT button to enter into the “EDIT MODE” - the display will read the current preset number and “EDIT MODE”
STEP 6 Turn the FUNCTION SELECT control to the desired effect or utility function.
STEP 7 Turn the PARAMETER SELECT control to the parameter you wish to alter after you have selected an effect or utility function.
STEP 8 Use the PARAMETER ADJUST control to select the new parameter value.
NOTE: To return back to the Equalization Mode - press the EDIT button again - the display will read the current preset number and
preset name.
STORING CHANGED PARAMETERS
STEP 9 After the desired parameters have been edited, press the STORE button to store the changes into the preset.
3