Rocktron Blue Thunder - Manual (Page 56)

Operating the Blue Thunder
Step 6 Press the STORE button to begin restoring the selected preset into the selected location. After
the process is completed, the display should read "ERRORS 0". This represents the number
of bytes that the Blue Thunder found did not initialize properly. Any number of errors other
than "0" means that the Blue Thunder may not have initialized properly and the process
should be repeated.
!! CAUTION !!
Pressing the STORE button at this time will overwrite
the current preset with the displayed factory preset.
ERRORS 0
The Blue Thunder will remain in this condition until the FUNCTION SELECT
control is turned to exit the Factory Restore function. The preset currently recalled
will be the preset most recently restored into the current location.
53