Rocktron Vendetta 100W 2x12 Combo Amp - Manual (Page 3)

- 3 -
Front Panel
1. INPUT jack
This 1/4" jack accepts the output from the guitar.
2. CHANNEL switch
Selects one of the four channels in sequence - 1 through 4. Also used to store
MIDI data. See the MIDI section for more information.
3. GAIN 1 control
Adjusts the amount of drive for Channel 1. Higher settings increase distortion and
sustain. 60's British Style clean.
4. GAIN 2 control
Adjusts the amount of drive for Channel 2. Higher settings increase distortion and
sustain. Hotter than channel one.
5. BRIGHT switches (Channel 1 and Channel 2)
Increases "sparkle" and "bite" of the channel.
6. BASS, MID, TREBLE and PRESENCE controls
This is where you decide the personality. The BASS, MID and TREBLE controls are
your classic bridge-T configuration (found in most of the popular guitar amps
throughout history). The PRESENCE control allows you to tailor the high frequency
response to suit your taste. Experiment...try new things. There are many great
tones at your fingertips!
7. VOICING switch
Select VINTAGE or MODERN. This switch affects both Channel 1 and Channel 2.
8. PRESENCE control
Tailors the high frequency of the channel. This control affects both Channel 1 and
Channel 2.
9. MASTER 1 control and channel on LED
Adjusts the overall volume of Channel 1 only and indicates the channel is active
when LED is lit.
10. MASTER 2 control and channel on LED
Adjusts the overall volume of Channel 2 only and indicates the channel is active
when LED is lit.