Rocktron Utopia G200B w/Banshee - Manual (Page 32)

32
6. PHASER Function
The PHASER function is available only in configur ations d isplay ing "PHA" in the configur ation
title.
Phase shifting involves splitting the input signal into two signals, then shifting the phase of different
frequencies of one signal and mixing it back with the original signal.
The PARAMETER SELECT knob will allow you to access these PHASER parameters:
The PHASER IN/OUT parameter determines whether the Phaser is active for the
current preset.
The DIR /EFF MIX par ameter is used to d efine the r atio of d ir ect signal level to
PHASER signal level.
The DEPTH parameter determines the modulation depth of the phase shift effect.
Higher par ameter settings r esult in the sweep of the filter ing effect occur r ing over
a wider frequency range.
The RATE parameter determines the speed at which the phase shifted signal is
modulated.
The RESONANCE parameter adds feedback to the Phaser so that it has a more
pronounced effect.
The STAGES parameter determines how many stages of phase shift are to be
active. A par ameter setting of "4" pr od uces a r esult similar to a vintage Phase 90 ,
while a setting of "6" emulates other phaser ped als.
PHASER
MIX DIR/EFF
DEPTH
P-RATE
RESONANCE
STAGES