Rocktron Utopia G200B w/Banshee - Manual (Page 8)

8
STEP 1 Turn ON the UTOPIA G200B.
STEP 2 Select your desired preset by pressing any button 1-3 to select presets. You may also do this
by following STEP 6. NOTE - the G200B starts with preset number 1, preset 0 does not ex-
ist.
STEP 3 Scroll through the different preset banks by pressing the UP button (Bank by 3). You may
also reach your desired preset by following STEP 6.
STEP 4 Scroll through the different preset banks by pressing the DOWN button (Bank by 3). You
may also reach your desired preset by following STEP 6.
STEP 5 Use the built-in expression pedal to change the parameter(s) in real time that are assigned to
the pedal controllers function.
STEP 6 You may also select a preset by turning the PRESET SELECT knob.
STEP 7 Turn the FUNCTION SELECT knob to the desired effect or utility function.
STEP 8 Turn the PARAMETER SELECT knob to the parameter you wish to alter under the selected
effect or utility function.
STEP 9 Use the PARAMETER ADJUST knob to modify a parameter value.
STEP 10 After editing any function parameter press the STORE button to start the
stor ing pr oced ur e. The d isplay will toggle and flash "STOR E AT PR ESET."
If you wish to save the altered preset in the current preset location, press the STORE button
a second time. If you wish to store the altered preset in a different preset location, turn the
PRESET control to the desired preset number, then press STORE a second time. Anytime
y ou wish to cancel the stor e pr ocess just tur n the PAR AMETER ADJUST one click.
STEP 11 To enter the "2N D Function" mod e, pr ess the "2nd " switch, this will tur n on a R ED LED
above the 2nd button. You can now turn On/Off functions within that preset using the but-
tons marked 1-3 (Effect On/Off, MUTE/TUNER and TAP). When in 2nd mode, the LEDs
above the buttons 1 and 3 will light "y ellow" and the MUTE/TUN ER "r ed ". Use the same
switch mar ked "2nd " to cancel and exit the 2nd Function mod e.
STEP 12 Insert the included Banshee Talkbox Tube into this hole. Run the tube up the mic stand (not
included). Using the included velco strap attach the other end of the tube to your micro-
phone (not included).
STEP 13 Use these knobs to make ad justments to the Gain and Tone of the talkbox effect and to d eter -
mine which output the will be "active" when the talkbox is on.
STEP 14 Use this switch to turn on and off the talkbox effect.
STEP 15 Plug y our guitar into this jack
STEP 16 Using a stand ar d guitar cable go fr om this jack to the input of y our amp.
Quick Reference....continued...