Rocktron Utopia G200B w/Banshee - Manual (Page 63)

63
PR OG CH TX ON , MAP, OFF DEFAULT = OFF
1 -TX-PC→ 127 [PR OGR AM TR AN SMIT MAP]
Note: The TRANSMIT CHANNEL must be assigned found in MIDI CHANNELS function so the
G200B can send out MIDI MESSAGES.
The G200B can send PROGRAM CHANGES to another MIDI capable device through the MIDI OUT/
THR U jack whenever y ou r ecall a pr eset . Y ou may send any PR OGR AM CHAN GE number y ou d e-
sir e ad d ing extr a flexibility when contr olling a favor ite piece of outboar d gear .
PROG CH TX
ON The G200B will send PROGRAM CHANGES on a 1 to 1 basis.
If you recall PRESET 1 on the G200B it will send PROGRAM CHANGE 1 on the
assigned TRANSMIT CHANNEL .
MAP When set to MAP the G200B will send a different PROGRAM CHANGE NUMBER
you
have selected to be sent using the 1 -TX PC→ 127 mapping !
Default mapping is 1 to 1.
HOW TO MAP PRESETS:
Using the 1 -TX PC→ 1 when y ou r ecall pr eset 1 it could send PR OGR AM CHAN GE 127
when set as 1 -TX PC→127
To MAP the -TX-PC→ is easy and her e’s how y ou d o it.
1. Turn the FUNCTION SELECT to PROGRAM CHAGES FUNCTION.
2. Use the PAR AMETER SELECT CON TR OL to select the -TX-PC d isplay
3. To pick the pr eset to be mapped [ The pr eset y ou will r ecall ] TUR N IN G the PAR AMETER
SELECT will scroll 1,2,3,4,5,6, etc……
4. Now use the PARAMETER ADJUST to select the PRESET NUMBER you want sent out from
the G200B.
EXAMPLE:
G20 0 B 1 -TX-PC→13 [R ECEIVIN G DEVICE]
5. Once you have set this PRESS STORE to complete the mapping process for that preset. The
display will show “ STORED “ to indicate success.
Note: Every changed mapping needs to be stored before advancing to the next G200B preset us-
ing the PARAMETER SELECT.
8. Program Changes: