Rocktron Utopia G200B w/Banshee - Manual (Page 64)

64
Any or all of the G20 0 B's pr esets may be d umped to another G20 0 B, a sequencer or MIDI utility pr o-
gr am using a PC MIDI inter face to cr eate a ( .sy x ) file. This file may be upload ed to the R ocktr on
website to share with other users. All the information about the presets you have created will be dumped
consisting of parameter values, title characters and controller assignments. When dumping a single pre-
set into another G200B, the dumped preset can be loaded into any preset location on the receiving unit.
Note: The G200B MIDI data when sent by external means such as a PC MIDI utility program you will
need to configur e it as stated below.
Buffer size 264 by tes
N o of buffer s 16 both R X and TX
100ms between buffers be used initially as a starting point.
10 0 ms after F7 [ optional ]
If a Midi sequencer is used to store the data record the Sysex data in real-time or adhere to the param-
eters given above.
8. MIDI DUMP/LOAD
Step 2
Step 3
M I D I D U M P / L O A D
1 8 P R E D U M P / L O A D
Step 1 Connect a standard MIDI cable from the MIDI OUT of the transmitting G200B to
the MIDI IN of the receiving G200B. Consult MIDI Connection drawing for more
information
If you are dumping a single preset to another G200B, the transmitting G200B must
have that preset selected.
Turn FUNCTION SELECT knob to MIDI DUMP/LOAD.
Step 4 On the receiving G200B use the PRESET Select control to select the preset location
where the received preset will be stored. Note that the preset currently stored at the
selected location will be lost when the new preset is received.