Desa P324 - Manual (Page 13)

108660
13
13
For more information, visit www.desatech.com For more information, visit www.desatech.com
LOG PLACEMENT FOR P324/VP324 MODELS
1. Place front (log 1) onto front of grate sliding log all the way
forward against grate fingers (see Figure 24).
2. Insert pegs on bottom of rear log (log 2) into holes in rear of
grate (see Figure 24).
3. Insert pegs on back of log 3 into right hole on log 1 and right
hole of log 2 (see Figure 25).
4. Insert pegs on back of log 4 into left hole on log 1 and left hole
of log 2 (see Figure 25).
To enhance the look of the hearth you may optionally place the lava
rock provided around the front and sides of the burner.
INSTALLATION
Continued
NOTICE: Do not put lava rock inside the burner pan or
around the air mixer fitting. Placing lava rock inside the
burner pan or blocking the openings of the propane/LP
air-mixer could cause performance problems.
INSTALLATION
Log Placement For P324/VP324 Models
Log Placement for P325(B)/VP325(B) Models
Figure 26 - Installing Logs 1 and 2
Figure 27 - Installing Log 3
Log 1
Log 2
Log 3
Log 1
LOG PLACEMENT FOR P325(B)/VP325(B)
MODELS
1. Place large back log (log 1) onto grate making sure notches
rest over grate (see Figure 26).
2. Place log 2 onto front right side of grate. Gently insert peg on
back of log 2 into hole on right front of log 1 (see Figure 26).
3. Insert peg on back of log 3 into hole on left front of log 1 (see
Figure 27). Log 3 will rest between first two grate fingers on
left of grate assembly (see Figure 28, page 14)
Figure 24 - Installing Logs 1 and 2
Figure 25 - Installing Logs 3 and 4
Log 4
Log 1
Log 2
Log 3