Installation, Continued – Desa P324 User Manual

Page 14

Advertising
background image

108660

14

For more information, visit www.desatech.com

For more information, visit www.desatech.com

COMBUSTION AIR KIT MODEL AK4
(OPTIONAL)

The outside air kit may be installed on the left side of the fireplace
only. The vent can be installed through the outside wall or a
ventilated crawl space. The handle to operate the damper door for
the outside air inlet will be located inside the left “screen pocket” of
the firebox (see Figure 30). Pull the handle to open or push to close.

APPLIANCE ENCLOSURE

Before finishing the enclosure around the appliance, inspect all joints
around the outer surround. Any gaps between the nailing flanges and the
framing should be sealed with noncombustible insulation or caulking.

If the appliance is mounted on a raised platform, it must be a
continuous surface and not on blocks without a solid surface. This
will prevent the entry of cold air by means of conduction through the
total bottom of the appliance. (see Figure 31).

CAUTION: Air inlet ducts are not to terminate in

attic space.

Figure 30 - Air Kit Handle Location

Air Kit
Handle

Side
Framing

Side
Framing

Caulk Here

Pack Insulation

Figure 31 - Sealing Between Appliance and Framing

Screen Pocket

INSTALLATION

Log Placement For PO325/VP325 Models (Cont,)
Combustion Air Kit Model AK4 (Optional)
Appliance Enclosure

4.

Insert peg on back of log 4 into hole on top left of log 1. Rest
the front of log 4 on the grate as shown in Figure 29.

5.

Insert peg on back of log 5 into hole on the top right of log 1
(see Figure 28). Rest the bottom of log 5 on grate as shown in
Figure 29.

To enhance the look of the hearth you may optionally place the lava
rock provided around the front and sides of the burner.

Figure 28 - Installing Logs 4 and 5

Figure 29 - Logs Installed

Log 5

INSTALLATION

Continued

NOTICE: Do not put lava rock inside the burner pan or
around the air mixer fitting. Placing lava rock inside the
burner pan or blocking the openings of the propane/LP
air-mixer could cause performance problems.

Log 4

Log 1

Log 3

Advertising