Star Headlight & Lantern ULB44-TD Star Phantom Undercover - Manual (Page 4)

-3-
4. Determine an appropriate user-supplied screw to penetrate the
headliner and securely mount the bracket to the roof brace (or other
mounting location) through the mounting hole in each forked bracket.
CAUTION: Take care to ensure when selecting a screw and drilling the hole that it
is capable of supporting the weight of the light and that it does not penetrate the
roof of the vehicle.
Forked Bracket Installation (CONT'D)
CAUTION: Take extreme caution not to over tighten the screws!!! Over tightening
of the screws can strip the holes.
Tighten the nuts securing
the mounting brackets
Press light tightly
against window
Mounting
Hole
5. Using the slots in the brackets, adjust the
light so that it fits tightly against the window,
carefully bending the forked brackets, if
necessary, and tighten the screws.
3. Attach a forked bracket to each L-bracket
using one of the nuts.
Note: There are two different style forked
brackets included. Use the one that suits
your application best.
Leave the nut slightly loose to
allow for minor adjustments during
the remainder of the installation.
1. Connect one of the double-slotted "L" brackets to each of the
slotted straight brackets using one of the screws, a flat washer,
a tooth washer, and a nut.
CORNER POST BRACKET INSTALLATION
2. Connect one bracket to each end of your Star Phantom
®
using the
screws provided. Loosen both screws slightly to allow for adjustability
when installing the lightbar.