Star Headlight & Lantern ULB44-TD Star Phantom Undercover User Manual
Page 5
-4-
Because of the wide variety of mounting applications, Star Headlight
& Lantern Co., Inc. assumes no responsibility for the secure mounting
of this light. It is the responsibility of the installer and/or owner to
ensure the lightbar is mounted securely. Check your light every time
you enter the vehicle to ensure that it is mounted securely.
3. Adjust the mounting brackets so that they rest flat against the corner post on each side
of the vehicle., then tighten all the screws.
4. Mark the two spots where you will be attaching your screws to the corner post and drill a
1/8" hole in each of the marked locations.
Caution: Be sure to check that there are no airbags, wires, or anything else behind the
molding that may be damaged by the screw holes.
5. Use two of the self-tapping screws in each side to secure each bracket to the corner
posts.
6. Once the brackets are securely tightened, check your mount to ensure the desired angle
is achieved. Stand behind the vehicle and inspect the light through the rear window.
Make any final adjustments necessary.
CAUTION: Take extreme caution not to over tighten the screws!!! Over tightening of
the screws can strip the holes and result in a faulty mount.
Corner Post Bracket Installation (CONT'D)