5 setting the mic input select, 6 check the eq parameter – Denon AVR-3805 User Manual
Page 30
30
1-5 Setting the MIC Input Select
1
Select “Mic Input Select” at the Auto Setup / Room
EQ Menu.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
M i c I n S e l e c t
* A u t o S e t / R o o m E Q
Sets whether the setup microphone is connected to the PIN JACK connector or the MINI JACK connector.
Please ask the DENON Authorized Service Center about the usable microphone other than the option setup.
2
Display the Mic Input Select screen.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
3
Select the Mic input jack or V.AUX L jack.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
4
Enter The setting.
The Auto Setup / Room EQ Menu reappears.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
1-6 Check the EQ parameter
1
Select “EQ parameter check” at the Auto Setup /
Room EQ Menu.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
• The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.
The EQ parameters that were set in Auto Setup can be checked.
This item is automatically displayed, after the measurement result of the “Auto Setup/Room EQ” is decided.
2
Display the EQ Parameter check screen.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
M i c
* M i c I n S e l e c t