Denon AVR-3805 - Manual (Page 75)

75
Surround parameters q
Pro Logic II x and Pro Logic II Mode:
• The Cinema mode is for use with stereo television shows and all
programs encoded in Dolby Surround.
• The Music mode is recommended as the standard mode for auto
sound music systems (no video), and is optional for A/V systems.
• The Pro Logic mode offers the same robust surround processing as
original Pro Logic in case the source contents is not of optimum
quality.
• The Game mode for playing games.The game mode can only be
used with 2-channel audio sources.
Select one of the modes (“Cinema”, “Music”, “Pro Logic”or
“Game”).
Panorama Control:
This mode extends the front stereo image to include the surround
speakers for an exciting “wraparound” effect with side wall imaging.
Select “OFF” or “ON”.
Dimension Control:
This control gradually adjust the soundfield either towards the front or
towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the
center speaker; only from the left/right speakers as a phantom image;
or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 mode
1 Select the DTS NEO:6 mode.
2 Play a program source.
(Main unit) (Remote control unit)
1 3 4~6
1
3
4, 5, 6
The DTS NEO:6 Cinema
or Music mode can be
chosen directly by
pressing the CINEMA or
MUSIC button on the
remote control unit
during playback in the
DTS NEO:6 mode.
• Surround playback can be performed for the analog input and PCM digital input 2-channel signals.
3 Set the surround parameter mode.
(Main unit)
(Remote control unit)
4 Select the play mode.
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
M O D E : M u s i c
* S u r r P a r a m e t e r
M O D E : C i n e m a
* S u r r P a r a m e t e r
Display
• The mode switches as shown below each time the button
is pressed.
DOLBY PL IIx DTS NEO:6