Denon AVR-3805 - Manual (Page 81)

81
DSP surround simulation
1 Select the surround mode for each input channel.
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
1
2,4
1
3
2 Press the surround patameter button.
Display the surround parameter screen.
The screen for the selected surround mode appears.
3 Set the parameters.
CH SEL
ENTER
4 If the setting mode ends, press the
surround parameter button again.
CH SEL
ENTER
(Remote control unit)
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When “Default” is selected and the
0 courser button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “ROOM
SIZE” is set to “medium”, “EFFECT LEVEL” to “10”, “DELAY TIME” to “30ms” and “LFE” to “0dB”.
• The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input
signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches
to a DTS signal, the mode automatically switches to DTS surround.
WIDE SCREEN JAZZ CLUB SUPER STADIUM ROCK ARENA
CLASSIC CONCERT MONO MOVIE VIDEO GAME VIRTUAL MATRIX
(Remote control unit) (Main unit)
(Remote control unit) (Main unit)
(Main unit)
CH SEL
ENTER
CH SEL
ENTER
(Remote control unit) (Main unit)
(Remote control unit) (Main unit)
R O O M : M e d i u m
* S u r r P a r a m e t e r
3 1 2, 4
(Remote control unit)