24 m3 wl settings – wheel circumference/wheel size – VDO M3WL User Manual
Settings – wheel circumference/wheel size
Setting the wheel size using the tyre list
Open the wheel size settings via the tyre list by pressing the
SET button (see page 20).
SELECT appears on the display.
BIKE button to scroll through the tyre list until
your tyre is displayed (in the example shown 26 x 2.35).
SET button to confirm the selection.
“Set OK” appears on the display.
If you want to configure further settings,
BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M3 WL returns to function mode.