VDO M6WL - Manual (Page 17)

17
M6
1x
BIKE TPC
SET
ALTI
Operation while cycling
While cycling, the display functions can be accessed by
pressing the
BIKE button and the ALTI button
( scroll forwards through the functions).
Pressing the BIKE or ALTI button shows the next function on
the display.
If the HEART RATE option is activated, the heart rate
functions are displayed by pressing the TPC button.
By pressing the SET button you can also scroll backwards
through the functions. This enables you to quickly display
the desired function.
The totals can be accessed by pressing the TPC (total/pulse/
CAD) button.
ATTENTION: if the HEART RATE option is activated, the
heart rate functions are displayed by pressing the TPC button.
A more detailed description can be found on page 06.
Sleep mode
If you take a break and the M6 is in the bracket,
the computer switches to standby mode after five minutes.
If you set off again after a break, the VDO M6 has an
auto-start function.
The auto-start function is activated by a movement sensor.
Moving the handlebars is enough to wake up the M6 from
sleep mode. The VDO M6 immediately switches to function
mode. The current speed and the distance are once again
displayed after a few seconds.