58 m6 settings – total values – distance downhill – VDO M6WL User Manual
Page 58
58
M6
Settings – total values – distance downhill
In the M6, you can set the distance travelled downhill
separately for bike 1 and bike 2, for example at the start of
the new cycling season.
ATTENTION:
the M6 stores all total values even if you
replace the batteries. No data is lost.
How to set the distance travelled downhill:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to move from Memory to Settings.
Press the
SET button to open the settings.
“Language” appears on the display.
Press the
BIKE or TPC button to scroll to the settings
for the
total values.
Press the
SET button to open the settings.
Press the
BIKE or TPC button to scroll to the setting
Dist Down (distance travelled downhill).
Press the
SET button to open the settings.
Press the
BIKE or TPC button to select whether you want
to configure the setting for
bike 1 or bike 2.
Press the
SET button to confirm your selection and open
the setting.
The
left digit flashes. Press the BIKE or TPC button
to set the value for this digit.
Press the
SET button to confirm your setting.