VDO M6WL - Manual (Page 33)

33
M6
Settings – sensor selection
Press the SET button to confirm the selection.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the
BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the
SET button.
The settings menu closes.
The VDO M6 returns to function mode.
Settings – heart rate intensity zones
On the M6, you can set four heart rate intensity zones for
heart rate measurement.
When training using your heart rate (heart rate transmitter),
a record is made of how long you spent in the intensity zones
1 to 4.
These values enable you to analyse your training in detail.
How to set the heart rate intensity zones:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to move from Memory to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the
HR intensity zones.
Press the SET button to open the settings.