48 m6 settings – total values – total ride time – VDO M6WL User Manual
Page 48
48
M6
Settings – total values – total ride time
You can set the total ride time on the VDO M6.
For example, you can set your total ride time (sum of the ride
time for all trips) at the start of the new cycling season.
You can set the values separately for bike 1 and bike 2.
ATTENTION:
the M6 has a data memory.
No data is lost when the battery is replaced.
How to set the total time:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to move from Memory to Settings.
Press the
SET button to open the settings.
“Language” appears on the display.
Press the
BIKE or TPC button to scroll to the settings
for the
total values.
Press the
SET button to open the settings.
Press the
BIKE or TPC button to scroll to the settings
for the
Total Time.
Press the
SET button to open the setting for the
Total Time.
Press the
BIKE or TPC button to select whether you want to
set the
total time for bike 1 or bike 2.
Press the
SET button to confirm the selection.
The
left digit
of the
hours setting flashes
and is ready
to be set.
Press the
BIKE or TPC button to set the value of this digit.
Press the
SET button to confirm your setting.