VDO M6WL - Manual (Page 51)

51
M6
Settings – total values – altitude gain
The next digit on the left starts to flash and is ready
to be set.
Press the
BIKE or TPC button to set the value for this digit.
Press the SET button to confirm your setting.
Once all the digits have been set, confirm the setting by
pressing the
SET button.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the
BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M6 returns to function mode.